Industry News
-
What is a PP ball valve?
You need a valve for a chemical line, but standard PVC is not an option. Choosing the wrong material could cause leaks, dangerous spills, and costly damage to your entire system. A PP ball valve is a shut-off valve made from polypropylene, a thermoplastic polymer. It is specifically chose...Read more -
What is a PVC valve socket?
You are looking at a PVC valve and see the term “socket end.” You are unsure if this is the right connection for your pipes, and ordering the wrong type means project delays. A PVC valve socket is the female end of a valve, designed to accept a PVC pipe. It creates a permanent...Read more -
What are the sizes of ball valves?
You need to order ball valves for a project, but you are not sure of the exact size. Ordering the wrong size means delays and costly returns, a headache no purchasing manager needs. Ball valve sizes are based on the nominal pipe size they connect to. They commonly range from small 1/2 inc...Read more -
What is a Bib Tap Used For?
You see “bib tap” on a product list and think it is just another name for a faucet. But using the wrong term could lead to ordering a product that does not fit. A bib tap is a wall-mounted faucet, usually found outdoors, specifically designed for attaching a hose. Its main use...Read more -
Will Pressure Testing a PVC Ball Valve Cause Damage?
You are about to pressure test a newly installed pipeline. You worry that closing the ball valves and applying high pressure could crack the valve bodies or damage the seals, turning a final check into a costly repair. Pressure testing will not damage a PVC ball valve if done correctly. T...Read more -
How Do You Install a True Union Ball Valve Correctly?
You have glued your valve into the pipeline. Then you realize the handle is facing the wrong way or glue has seized the mechanism. Now you have to cut it out. To install a true union ball valve, first glue only the end connectors to the pipe. After the glue cures, insert the valve body wi...Read more -
Which is better uPVC or PVC?
You see “PVC” and “uPVC” on spec sheets and they seem interchangeable. This confusion could lead to ordering the wrong material for a critical project, risking costly system failures. For pipes, fittings, and valves, uPVC (Unplasticized Polyvinyl Chloride) is bette...Read more -
What is the lifespan of a PVC ball valve?
Your client is asking for a lifetime guarantee on their new irrigation system. You need to know how long the PVC ball valves will actually last to manage their expectations accurately. A high-quality PVC ball valve can last for many years, even up to 20 years or more, under ideal conditio...Read more -
What is a union ball valve?
A filter in your system is clogged, but the valve is glued in place. Now you must drain everything and cut the pipe just to do routine maintenance, wasting hours. A union ball valve is a ball valve with threaded connectors, called unions, on each end. These unions allow you to remove the ...Read more -
Do PVC ball valves leak?
You installed a new valve, expecting a perfect seal. A slow, silent drip could be causing water damage right now, completely without your knowledge and ruining your hard work. A high-quality PVC ball valve should not leak. Leaks almost always happen due to improper installation, physical ...Read more -
Will Pressure Testing Damage a PVC Ball Valve?
You are about to pressure test your newly installed PVC lines. You close the valve, but a nagging thought appears: can the valve handle the intense pressure, or will it crack and flood the job site? No, a standard pressure test will not damage a quality PVC ball valve. These valves are sp...Read more -
How to make a PVC ball valve turn easier?
The valve is stuck fast, and your gut tells you to grab a bigger wrench. But more force can easily snap the handle, turning a simple task into a major plumbing repair. Use a tool like channel-lock pliers or a strap wrench to gain leverage, gripping the handle close to its base. For a new ...Read more
